ABB SureWave SFC Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 77

background image

ABO U T T H IS D O C UM E NT

4/78

and operation of the product are affected by these modifications, the extra information required
to cover these adaptions will be supplied in extra documentation.

If information is required beyond the instructions in this manual, please refer the matter to ABB

1.1.5 Target groups and required qualifications

The product presented in this manual is part of an industrial environment where voltages are pre-
sent that contain a potential hazard of electric shock and/or burn. For this reason, only personnel
who have a thorough knowledge of the SFC and the industrial environment and have obtained
the required qualification may handle, install, operate, or maintain the product.

The manual addresses personnel who are responsible for operation and maintenance of the
SureWave SFC. The personnel must carry out the listed tasks in a manner that does not cause
physical harm or danger, and that ensures the safe and reliable functioning of the product.

“Commissioning of the SureWave SFC must only be performed by
qualified and certified ABB personnel.”

Handling

The personnel must be skilled and experienced in unpacking and transporting heavy equipment.

Mechanical installation

The personnel must be qualified to prepare the installation site according to the site and equip-
ment requirements and to perform the installation accordingly.

Electrical installation

The personnel must have a sound knowledge of the relevant electrical codes and specifications
covering low voltage equipment, be experienced with electrical wiring principles, and know the
electrical symbols typically used in wiring diagrams.

Operation

The personnel include all persons who operate the SureWave SFC from the HMI. Those people
must know the functions of the GDM, be adequately trained for the SFC, and understand its oper-
ation process.

Maintenance

The personnel include all persons who:

•

are qualified to carry out preventive and corrective maintenance on SureWave SFC as de-
scribed in this manual.

•

are thoroughly familiar with the product.

•

have a sound knowledge of the relevant electrical codes and specifications covering low
voltage equipment.

•

are able to assess the hazards associated with the energy sources of the SureWave SFC
system and act correspondingly.

•

know the safe shutdown procedures for the SureWave SFC system

«
...
2
3
4
5
6
...
»

Содержание SureWave SFC














































































Отзывы:

Нет отзывов

Похожие инструкции для SureWave SFC

Бренд: Eco Drive Страницы: 138

Zeverlution 3680

Бренд: Zeversolar Страницы: 2

Бренд: Thiele Страницы: 18

Бренд: All-Power Страницы: 35

Бренд: Premier Страницы: 12

Бренд: S.M.S.L Страницы: 31

Бренд: Datavideo Страницы: 13

Бренд: EBARA Страницы: 34

Бренд: LevelOne Страницы: 9

10/100/1000 (SFP)

Бренд: Dynamix Страницы: 2

Бренд: D&H Страницы: 106

IB-MP3012 series

Бренд: Icy Box Страницы: 44

Бренд: Hall Research Technologies Страницы: 8

Бренд: Channel Vision Страницы: 2

Varispeed V7 Series

Бренд: YASKAWA Страницы: 34

Бренд: B.M.C. Страницы: 8

Бренд: RS Страницы: 8

Бренд: Wavtech Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды