ABB SensyMaster FMT230, Инструкция по эксплуатации

Страница: 95 / 112

SensyMaster FMT230, FMT250 THERMAL MASS FLOWMETER | OI/FMT230/250-EN REV. C 95
Overview
The states of the process variables and counters are represented by symbols; please see the table below.
Symbol Description
Counter stop
–
No change, current value
Priority Failure Error text Process variables Counter
Qm
[%] Qv@ [%] Temperature [°C] Standard density
[kg/m3]@ 0°C, 1atm
96 F096.029 ADC Failure on Frontend Board. 0 0 20 1,293 –
93 F093.033 Sensor failure or disconnected. 0 0 20 1,293 –
92 F092.030 Electronics failFrontend Board. 0 0 20 1,293 –
90 S090.031 Sensor temperature out of range. 0 0 20 1,293 –
84 F084.010 NV data defect. Data storage irreparable. 0 0 20 1,293 –
81 F081.041 FEB voltages outside range. – – – – –
78 C078.003 Flowrate to zero 0 0 – – –
76 C076.005 All totalizer stopp. – – – –
74 C074.006 Totalizer reset. Reset of one or more
Totalizers. – – – – 0
70 C070.026 An alarm is simulated. – – – – –
59 M059.038 Invalid Sensor configuration – – – – –
58 M058.040 Sensor soiling detected. – – – – –
55 S055.032 Frontend temp. out of range. – – – – –
47 S047.015 Dig.Out 41/42 is saturated. – – – – –
46 S046.042 Dig.Out 51/52 is saturated. – – – – –
45 S045.034 Sensor heat emission limit. – – – – –
44 S044.000 Mass flowrate exceeds limits. – – – – –
42 S042.037 Medium temperat exceeds limits. – – – – –
41 S041.039 Std.Volume flow exceeds limits. – – – – –
38 M038.009 Sensor memory defective. – – – – –
28 M028.007 Display value is<1600h at Qmax. – – – – –
26 M026.004 Maintenance interval is reached – – – – –
24 M024.008 Device not calibrated. – – – – –