14
SCR E E N M A STE R RVG 20 0 / PA PE R LE SS R ECOR DE R
| C I/R VG 2 0 0/0 01- EN R E V. A
…
6
Basic setup
Change the channel configuration
1
At the
System Configuration
page, press the
Channels
icon
to display the
I/O Groups 1(6) Channels
page.
2
Press the icon associated with the required
Group 1 (6)
Channels
(for example
) to display the
Channel 1 (01 …06)
dialog.
IMPORTANT (NOTE)
Use the
arrows to select different
Channels
in the same process group.
3
Press the
Setup
tab and then the
icon associated with
each field to enter and configure
Setup
parameters – press
to accept the content at each field.
4
Repeat for all other tabs on the
Channel 1.01 (1.06)
dialog
and for all other required channels.
When all fields have been configured, press
to return to
the
I/O Groups 1(6) Channels
page then
to return to
the
System Configuration
page.
5
Proceed to the next section to set up the inputs / outputs
(I/O).
Set up the inputs / outputs (I/O)
1
At the
System Configuration
page, press the I/O icon
to
open an I/O page displaying fitted I/O modules.
IMPORTANT (NOTE)
I/O modules are detected automatically.
2
Press the icon associated with the required module to
display the dialog and fields associated with that module.
3
Configure parameters for each required module.
4
When all parameters have been configured, press
to
return to the
I/O
page then
to return to the
System
Configuration
page.
5
Proceed to the next section to exit
Configuration
level and
save changes.
Save current configuration and exit
1
Press
at the
System Configuration
page – a prompt is
displayed with options to
Apply Changes, Export
Configuration, Return to Configuration Mode
or
Discard
Changes
:
2
Press
Apply Changes
(
) to save the current
configuration and return to the
Operator
page.
3
Proceed to the next section to start recording.
Start recording (archiving)
1
Open the media door and insert the external media card and
close the door.
Recording is initiated automatically.
IMPORTANT (NOTE)
Alternative archive media can be used – refer to
the Operating instructions (OI/RVG200-EN) for
compatible media types.
System Configuration
Apply Changes
Export Configuration
Return to Configuration Mode
Discard Changes