CSS sahara_02_04_instructions.doc
,
Page
3
of
12
INTRODUCTION
The product to which this manual refers should be installed, commissioned, operated and maintained
under the supervision of a competent
Electrical Engineer
in accordance ith elevant tatutory
requirements and good engineering practice, including Codes of Practice where applicable, and properly
used within the terms of the specification.
The instructions in this manual should familiarize qualified personal with the proper procedures to keep
all new unit(s) in proper operating condition. These instructions for installation, operation and
maintenance of Package Compact Substation should be read carefully and used as a guide during
installation and initial operation.
These instructions do not propose to cover all details or variations in equipment, nor to provide for every
contingency to be met in connection with installation, operation, or maintenance. Should further
information be desired, or particular problems arise which are not covered, please contact the nearest
ABB office.
We would in particular stress the importance of care in:
•
Site selection and design, embodying features that provide adequate ventilation, protection and
security and which have taken account of appropriate fire, moisture and explosion hazards.
•
Jointing.
•
Earthing.
•
Selection and setting of electrical protection in primary and secondary, against overload,
overvoltage and short-circuit.
•
Carrying out regular inspection and electrical and mechanical maintenance.
The Package Compact Substation(s) covered by these instructions have been repeatedly nspected nd
tested to meet all applicable standards of IEC, to ensure you of a first-rate quality product, which should
give many years of satisfactory performance.
The specific ratings of each Package Compact Substation are shown on the drawings.
File these instructions in a readily accessible place together with drawings and descriptive ata f he
Package Compact Substation. These instructions will be a guide to proper maintenance of the equipment
and prolong its life and usefulness.
GENERAL
These Package Compact Substations are locally manufactured in the Kingdom of Saudi Arabia by
ABB
Electrical Industries Co. Ltd
., part of the
ABB
group world-wide to meet the environmental conditions
of the Kingdom, neighboring Gulf countries and other similar places for outdoor installations.
