2105551-001 rev. AC |
3
1 Health and safety
1.1 Safety warning and note conventions
DANGER – Serious damage to health / risk to life.
This symbol, in
conjunction with the signal word "DANGER", indicates an imminent
electrical hazard. Failure to observe this safety information will result in
death or severe injury. The text may state the hazard, what to do or not
do to avoid the hazard, and what the result would be if not followed.
DANGER – Serious damage to health / risk to life.
This symbol, in
conjunction with the signal word "DANGER", indicates an imminent
danger. Failure to observe this safety information will result in death or
severe injury. The text may state the hazard, how to avoid the hazard,
and what the result would be if not followed.
WARNING – Bodily injury / property damage / equipment damage.
This symbol, in conjunction with the signal word "WARNING", indicates
a potentially dangerous situation. Failure to observe this safety
information may result in severe injury. The text may state the hazard,
how to avoid the hazard, and what the result would be if not followed.
CAUTION – Property damage / minor injury.
This symbol, in
conjunction with the signal word "CAUTION", indicates a potentially
dangerous situation. Failure to observe this safety information may
result in minor or moderate injury. The symbol may also be used for
property damage warnings. The text may state the hazard, how to
avoid the hazard, and what the result would be if not followed.
NOTICE – Property damage / data loss.
This symbol indicates a
potential situation where data could be corrupted, gas samples could
be contaminated, or normal operation could be effected if
recommendations are not followed. The text may state the condition,
how to avoid undesirable results, and what the results would be if not
followed.
IMPORTANT NOTE:
This symbol indicates useful information,
important information, or information to clarify a concept. The signal
words "IMPORTANT NOTE" do not indicate a dangerous or harmful
situation.
1.2 Potential safety hazards
The Remote Modular Controller operates on 9 to 30 Vdc. There are no hazardous
voltages present in the controller. There are no chemical or burn hazards.
WARNING – Bodily injury.
Read and follow instructions contained in
this guide before and during equipment installation. Failure to do so
could result in bodily injury or equipment damage.
Содержание RMC-100
Страница 33: ...2105551 001 rev AC 33 Notes...
Страница 34: ...34 2105551 001 rev AC This page left intentionally blank...
Страница 35: ...2105551 001 rev AC 35 This page left intentionally blank...
