2105551-001 rev. AC |
21
6.2 Configuring the station
To configure the station:
1. At the PCCU32 Entry screen, click the station ID name in the top node of the
navigation tree. The Station Setup tab displays.
2. Set up the basic settings identified in Table 14.
Table 14: Required Station setup
Entry
Format
Description
Station
ID
10 digit
alphanumeric
The station identifier code uniquely identifies each station. If
running a multiple tube station, the station ID is the same for
all tubes on the RMC. If left blank on a single tube device,
the station ID will be the same as the device ID.
Location
24 digit
alphanumeric
The location identifier describes the location, such as the
county name or a road number. Not mandatory.
Date/
Time
MM/DD/YYYY
HH:MM:SS
(24 hour clock)
Date and time must be set correctly and should agree with
the collection equipment if measurement tubes are
instantiated.
3. Verify the Lithium Battery Status is OK in a green bar (Figure 14). If the status is
Low Voltage or Not Connected, the field background color is red. Refer to
Troubleshooting in the
RMC100 User Manual
to determine and resolve the
problem before continuing with the startup instructions.
Figure 14: Station Setup screen
4. Change any other settings in the Station Setup tab as needed. Leave PCCU
open on the
Station Setup
tab. For more information, refer to the RMC User
Manual.
Содержание RMC-100
Страница 33: ...2105551 001 rev AC 33 Notes...
Страница 34: ...34 2105551 001 rev AC This page left intentionally blank...
Страница 35: ...2105551 001 rev AC 35 This page left intentionally blank...
