manualshive.com logo in svg

ABB REU615, Руководство по применению

Поделиться
Скачать
ABB REU615 Скачать руководство пользователя страница 17

Section 2 

REU615 overview

2.1 

Overview

The voltage protection and control IED, REU615 is available in two standard
configurations, denoted A and B. Configuration A is preadapted for voltage and
frequency-based protection schemes in utility and industrial power systems and
distribution systems including networks with distributed power generation. The B
configuration is designed for automatic voltage regulation of power transformers
equipped with an on-load tap-changer. Both configurations also feature additional
CB control, measuring and supervising functions. REU615 is a member of ABB’s
Relion

®

 product family and part of its 615 protection and control product series.

The 615 series IEDs are characterized by their compactness and withdrawable–unit
design.

Re-engineered from the ground up, the 615 series has been designed to unleash the
full potential of the IEC 61850 standard for communication and interoperability
between substation automation devices. Once the standard configuration IED has
been given the application-specific settings, it can directly be put into service.

The 615 series IEDs support a range of communication protocols including IEC
61850 with GOOSE messaging, IEC 60870-5-103, Modbus

®

 and DNP3.

2.1.1 

Product version history

Product version

Product history

3.0

Product released

2.1.2 

PCM600 and IED connectivity package version

•

Protection and Control IED Manager PCM600 Ver. 2.3 or later

•

REU615 Connectivity Package Ver. 3.0 or later
•

Parameter Setting

•

Firmware Update

•

Disturbance Handling

•

Signal Monitoring

•

Lifecycle Traceability

•

Signal Matrix

•

Communication Management

•

IED Configuration Migration

•

Configuration Wizard

•

Label Printing

1MRS757054 A

Section 2

REU615 overview

REU615

11

Application Manual

Содержание REU615

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды