GUID-E2BA2640-AAB4-402E-8940-F952CAD458DD V1 EN
Figure 75:
Configuring measurement items
•
Apply custom scaling, if needed.
1.
In the
scaling
box, define the correct value which is a coefficient applied to
the measurement value. The supported scaling is linear: new_value =
read_measurement_value × scaling_pr offset_property.
2.
In the
offset
box, define the offset value.
3.
In the
unit
box, define the unit (string).
4.
Adjust the other limit properties to better fit the scaled measurement value.
•
In the
order
box, define custom order for the measurements, if needed.
The smaller the order property, the higher the measurement's position in the
measurement list.
By default, all measurement list items are arranged in alphabetical order.
Modifying the order property overrides the default behavior.
6.1.2.2
Phasors page
By default, the Phasors page template available in Page Organizer contains an empty
Custom signal group. Measurements can be added to the Custom signal group or new
signal groups can be added and removed by opening the Phasors page in Page Editor.
Opening Signal Grouping Editor
1.
In Page Editor, open the
Phasors
page.
2.
Click
in the lower-right corner of the Phasors page.
1MRS759117 A
Section 6
LHMI engineering
REX640
99
Engineering Manual
