ABB RELION RET670, Руководство оператора

Страница: 99 / 128

11.6.10.6 Automatic voltage control for tapchanger, single and parallel control
TR1ATCC/TR8ATCC
Settings/Test/Function status/Control/TransformerVoltageControl(ATCC,90)/
TR1ATCC:x
Settings/Test/Function status/Control/TransformerVoltageControl(ATCC,90)/
TR8ATCC:x
Displays parameters for current and voltage levels, deadbands, timers and alarm
levels.
11.6.11 Monitoring
Monitoring includes large amounts of viewable data including Disturbance report
data, Service values, Current phasors, Voltage phasors, Milliampere signal level
supervision, Binary signal status report, Events, MVGGIO, MVExpander and LEDs.
11.6.11.1 Logical signal status report BINSTATREP
Main menu/Test/Function status/Monitoring/BinarySignalStatusReport/
BINSTATREP:x
Displays sets of output measurements with several outputs per set of measurements.
11.6.11.2 Disturbance report DRPRDRE
Test/Function status/Monitoring/DisturbanceReport(RDRE)
Displays data about disturbance reports. The disturbance report can be switched
off, a disturbance report that has been initiated is indicated by a boolean number, as
are completed reports and cleared reports. The parameter
MEM USED indicates
that more than 80% of the memory space available for disturbance report data has
been used and the need to clear the memory is pressing. The
Memory USED
parameter generates an integer value showing the actual amount of memory used
by the disturbance record repository. The maximum number of incoming analog
channels is 40 and their Trig status is indicated here. The
Fault number parameter
generates an integer indicating the number of faults recorded since the last clearing
of the memory.
11.6.11.3 Event counter CNTGGIO
Main menu/Test/Function status/Monitoring/EventCounter(GGIO)/
CNTGGIO:x
Display the output data of the CNTGGIO function.
1MRK504114-UEN E
Section 11
Test the IED
93
Operator's manual