1.
Drill a hole Ø 0.38 inches (10 mm) in the wall of the supervised space.
A
B
C
D
A040183 V2 EN
Figure 10:
Dimensions of the lens sensor
A 0.14 inches (3.5 mm)
B 0.39 inches (9.9 mm)
C ∅ 0.37 inches (9.5 mm)
D 0.75 inches (19.1 mm)
2.
Fit the lens sensor into the hole and fasten it with a self-tapping M3 screw.
Alternatively, the lens sensor can be fastened with a cable tie. To do this, secure the
cable tie to a suitable point of attachment on the cubicle wall and wrap the cable tie
tightly around the sensor.
1MRS240046-IB B
Section 4
Mounting
REF615R
21
Installation Manual
