4.2.2
Installing the plug-in unit
1.
To reinstall the unit into the case, align and insert the lips on both sides of the tray
into the guide rails on the inside walls of the case.
2
1
GUID-2F0052BC-228F-4BE1-A779-59E08A7184FE V1 EN
Figure 3:
Guide rail inside the case
1 Tray (plug-in unit) guide rail
2 Tray guide bracket
2.
Push the unit straight inward until it fully seats in the case.
3.
Secure the knurled screws.
4.
Push in the sealing wires and secure, if necessary.
Make sure that the unit plugged-in corresponds to the case in which it is inserted
based on application requirements.
Check that the plug-in unit and the case have the same serial number or
compatible order code numbers before fitting the plug-in unit into the
case.
1MRS240046-IB B
Section 4
Mounting
REF615R
13
Installation Manual
