1. Save the actual project configuration in PCM600 to make all signals visible for
CMT.
2. Right-click the IED in the plant structure and select
Communication
Management
to start the Communication management tool.
3. Select the DNP3 protocol from the new window and click
OK
.
presents the design of the two container windows, which open after the
selection of DNP3.
•
The right window shows tabs for possible communication channels.
•
The left window has a drop down menu for signal selection and buttons
for signal movement, see
IEC09000722-1-en.vsd
IEC09000722 V1 EN
Figure 63:
CMT: Container window design when selecting DNP3 protocol
Procedure to move signals:
1. Select one or several signals.
•
Click in the list of signals to select one signal.
•
Press
Shift
or
Ctrl
and several signals to select a set of signals.
•
Right-click in the list of signals, select
Select All
from the context menu
or press
Ctrl+A
to select all signals.
2. Press the blue arrow button to insert the selected signals into the configuration.
3. Press the green double arrow button to insert all signals into the configuration,
Section 9
1MRK511240-UEN B
DNP3 communication engineering
86
670 series
Engineering Manual
