IEC09000723-1-en.vsd
IEC09000723 V1 EN
Figure 34:
ACT: HW signal channels
5.1.8
Validation
Validation checks the application configuration on errors about the rules and
restrictions defined for doing a MainApplication on three levels.
•
During creating the logic while doing a connection or placing a function block.
•
On demand by starting the validation.
•
When writing the application configuration into the IED.
Validation when creating the application configuration
Validation is made when creating the application configuration, for example:
•
A connection between two input signals or two output signals is not possible.
•
A connection between two different data types is not possible, for example a
binary output to an analog input.
1MRK511240-UEN B
Section 5
Protection and control engineering
670 series
49
Engineering Manual
