2.2
IED engineering process
PCM600 is used for various tasks in the IED engineering process. See
•
IED engineering management
•
Organizing the bay IEDs in the structure of the substation by defining
voltage levels and bays below the substation. PCM600 manages the project.
•
Configuring the IED functions (for example protection and control functions
and LHMI functions) by using the Application Configuration tool.
•
Configuring the parameters and setting values for the IED itself and for the
process functionality by using the Parameter Setting tool.
•
Drawing single line diagrams and do the link to dynamic process values by
using the Graphical Display Editor tool. The single line diagrams are shown
on the LHMI on the bay IED.
•
Configuring connections between the application configuration function
blocks and physical hardware input and outputs by using the Signal Matrix
tool or the Application Configuration tool.
•
Communication engineering
•
IEC 61850 station communication engineering is done with a separate tool,
for example, CCT600. PCM600 interacts with CCT600 by importing and
exporting SCL files.
•
Organizing GOOSE messages received and managing the used IO signal is
done by using the Signal Matrix tool.
•
Communication engineering for the DNP3 protocol by using the
Communication Management tool.
•
Communication engineering for the IEC 60870-5-103 protocol by using
Application Configuration tool and Parameter Setting tool.
•
Disturbance record management
•
Generating overviews about the available (disturbance) recordings in all
connected protection IEDs by using the Disturbance Handling tool.
•
Manually reading the recording files (in Comtrade format) from the
protection IEDs by using the Disturbance Handling tool or automatically by
using the PCM600 scheduler.
•
Managing recording files with the assistance of the Disturbance Handling tool.
•
Creating overview reports of recording file content for fast evaluation with
assistance of the Disturbance Handling tool.
•
Service management
1MRK 511 245-UUS -
Section 2
Engineering tool set
650 series ANSI
19
Engineering Manual
