6
1.2 Handling during transportation
The circuit- breakers shall never be transported without packing.
The cases shell be transported in such a way that they:
Do not stand in water.
Are not exposed to damage
Every case must be secured during transport. They must be arranged so that the cases
cannot move in any direction. The speed must be adapted to the road conditions.
Factory packed Breaker should not be stacked one over the
other.
1.3 Lifting
Before lifting the case, observe the information on it (such as symbol, weight, etc.). The
cases shall be lifted by a lifting device equipped with forks or slings (see Fig C).
If a crane is used, slings shall be used. The units must not be rolled or dropped.
Fig. C Lifting the case
1.4 Lifting the breaker out of the case
Lifting the breakers out of the transport cases is necessary only just before erection (see
product information kept inside the cabinet). If they are to be stored during some time, see
"Storage Prior to Erection".
Содержание OVB-SDB
