32 MNS-SG Operation and Maintenance | Manual
To attach the lifting device:
1.
Remove the carriage stop from one end of the lineup.
Remove carriage stop
2.
Loosen all rails for the overhead lift device and mount
the locator plates. Note that the plates have round
bosses that mate with holes in the rails.
3.
Adjust the rails as required to loosely secure the locator
plates in place with the bosses in their mating holes.
Adjust the rails
4.
After mating all locator plates in place with the rails, secure
the locator plates and the rails.
5.
Position overhead lift device on the tines of forklift.
Raise the overhead lift device up to the rails on the frame.
Raise lift device
Align wheels on the front rail and behind the rear rail. Adjust
the upper-rear wheel to minimize vertical movement.
Align wheels
Push the overhead lift device off the forklift onto the rails.
Carriage stop