2TLC010040M0201 Rev. A
www.abb.com/jokabsafety
2(4)
Eva – Orientation and mounting
Depending on how Magne is mounted on the fence, Eva and the anchor plate can be mounted in two ways.
Ensure that Eva is oriented and mounted in the corresponding mounting holes to which the Magne model
is mounted. See figures below for different ways of orientation and mounting of Eva.
Installation and mounting
Note! In the following step by step illustration, a Magne 4 is mounted.
1.
Pre-assemble Magne and mount it on to the door
post.
2.
Mount Eva sensor with self-tapping screw 4,2x16
(x2). Make sure Eva is oriented correctly and that
the correct mounting holes are used.
IMPORTANT!
Orientation and mounting position of Eva
depends on Magne model and how Magne is
mounted on the fence. Spacer DA2 has to be used
in the holes at the back side of Eva.
