manualshive.com logo in svg

ABB INSITE PRO M COMPACT SCU100, Руководство пользователя, Страница: 50 / 96

Поделиться
Скачать
ABB INSITE PRO M COMPACT SCU100 Скачать руководство пользователя страница 50

SNMP

To enable version 3 mark the v.3 checkbox, enter UDP port number, password (at least 8 signs), security 

name and engine ID (at least 12 characters in hexadecimal format). Port number must be 161 or greater 

than 1024 (the same as for versions v.1/2c). 

Username and password perform the authentication needed to authenticate and encrypt the request 

to access data using SNMPv3. For the authentication the MD5 protocol is used and messages are 

additionally encrypted with the DES algorithm.

SNMP trap

Manage SNMP trap settings. Remember to enable “SNMP trap” in “Configuration - Alarms”.

Modbus

Here you can make changes to the MODBUS TCP and MODBUS RTU settings

Modbus TCP settings
Enable Modbus TCP

Enable Modbus TCP communication

TCP port

Configure TCP port

Modbus RTU settings
Modbus ID

Select Modbus ID

Baud rate

Select baud rate

Parity 

Select parity setting: “None”, “Odd” or “Even”

50

SCU100 

INSITE PRO M COMPACT USER MANUAL

Содержание INSITE PRO M COMPACT SCU100

































































































Отзывы:

Нет отзывов