ABB i-bus
®
KNX
Parameters
Note about navigation in the PDF: Key combination
Product Manual | EN | MG/S 11.100.1.1 | 9AKK108467A5941 Rev. B 45
'Alt + left arrow' jumps to the previous view/page
7.2.2.5
"Device x Active" checkbox
This parameter is used to define whether the individual data point is activated.
Deactivated data points are taken into account in the
Total Gateway Data Points
parameter.
Option
No
The data point is deactivated.
Yes
The data point is activated.
Prerequisites for visibility
•
Parameter window
Config Device x
\ parameter
Device x Active
\ option
Yes
.
•
This parameter is in the
Config Device x
parameter window.
Note
The # indicates the data point number from 1 to 100.
The # is shown in the name of the corresponding Group Object.
The gateway continuously polls the data points in ascending order (from data point 1 to 100).
7.2.2.6
Group Object name
This parameter is used to specify an individual description for a Group Object. The description is shown in
the name of the corresponding Group Object.
Option
Free text entry
Maximum 64 ASCII characters; the maximum number of characters may vary for
other character formats.
Prerequisites for visibility
•
This parameter is in the
Config Device x
parameter window.
