ABB FS4000, Руководство по эксплуатации

Страница: 71 / 126

Parameterization
D184B097U02 FV4000 / FS4000 71
Buttons Menu item Buttons Set parameter Buttons
Configurable
parameters
Comments
„Step“
S-Steam
Qm Medium: Saturated steam
Operating mode:
Mass with correction (Pt100
required)
Selection: Saturated steam mass flow
„Step“
S-Steam
Qv Medium: Saturated steam
Operating mode:
Operating volume
Selection: Saturated steam volume flow
„Enter“ + „Step“
„Data“
„Step“ Unit
Density
„Enter“
g/ml_
g/cm3_
Selection:
g/ml, g/cm3, g/l, kg/l, kg/m3, lb/ft3, lb/ugl
The menu appears when the following operating
modes are selected:
Fluid Qm (D,T), fluid Qm (V,T), gas mass Qm (pT),
gas mass Qm (D)
„Enter“ + „Enter“
„Data“
„Step“ Ref. density
„Enter“
1.000
kg/l
0
kg/l Selection:
0.001 ... 1000000
The menu appears when the following operating
modes are selected:
Fluid Qm (D,T), fluid Qm (V,T), gas mass Qm (D)
„Enter“ + „Enter“
„Data“
„Step“ Normal dens.
„Enter“
0.001 kg/l
kg/l
0
kg/l Selection:
0.000 ... 0.100
The menu appears when the following operating
mode is selected:
Gas mass Qm (pT)
„Enter“ + „Enter“
„Data“
„Step“ Normal factor
„Enter“
1.000
0
Selection:
0.001 ... 1000000
The menu appears when the following operating
mode is selected:
Gas standard Qn (Kmpf)
Standard factor =
ρ
b
/
ρ
0
„Enter“ + „Enter“
„Data“
„Step“ Normal cond.
„Enter“
1.0133 bara
0 °C
1.0133 bara
20 °C Selection:
0.001 ... 1000000
The menu appears when the following operating
modes are selected:
Gas mass Qm (pT), gas standard Qn (pT)