ABB FlexPLP IRPLP 220, Руководство по эксплуатации продукта

Страница: 68 / 146

4.2.5 Fastening of a unit to the floor plate
Equipment
The required equipment is the standard toolkit, and in particular:
Hex keys (Allen keys) 3 and 6 (socket wrenches recommended) 1
Torque wrench used with socket head cap 6 mm. See Bolt, screws, tightening torques
on page 133 .
2
Two dowel pins Ø8 and eight M8 socket head screws for 190-590 stroke unit (twelve
M8 socket head screws for 670 mm stroke unit). 3
Procedure
Info/Illustration Action
As it is necessary to jog the first horizontal axis
carriage to tighten all the screws, you must pre-
pare the equipment (controller, cables, SMB box)
necessary to control the unit. See
Cabling on
page 16 .
1
xx1800002136
Remove the cover plate (B) of the first horizontal
axis by loosening its six M5x10 Class 8.8 fixing
screws (A). 2
xx1800002137
Remove the cover plate by sliding it from one end
of FlexPLP IRPLP 220. 3
Continues on next page
68 Product manual - FlexPLP IRPLP 220
3HAW050041018-001 Revision: C
© Copyright 2016 - 2018 ABB. All rights reserved.
4 Installation and commissioning
4.2.5 Fastening of a unit to the floor plate