ABB FENA-01, Руководство по протоколу

Страница: 25 / 52

Client configuration
25
Client configuration
Overview
This chapter gives information on configuring the Modbus/TCP
client for communication through the FENA-01 Ethernet Adapter
module.
Configuring the system
After the FENA-01 Ethernet Adapter module has been
mechanically and electrically installed according to the instructions
in the FENA-01 Hardware Manual and has been initialized by the
drive, the client must be prepared for communication with the
module.
Please refer to the client documentation for information on
configuring the system for communication with the FENA-01.
Modbus Register Maps
The Modbus register map presented by the FENA-01 to the
Modbus client is selected by the PROFILE configuration
parameter. For details, see chapter
Drive configuration .
For Modbus register map definitions, see chapter Communication .
For definitions of Control, Status, References and Actuals for a
given communication profile, see chapter
Communication profiles .