ABB FENA-01, Руководство по протоколу

Страница: 15 / 52

Drive configuration
15
*Actual parameter group number depends on the drive type. Eg,
group A (group 1) equals to parameter group 51 in ACS350,
ACS355, ACSM1, ACS850 and ACQ810.
1 FBA TYPE
This parameter shows the fieldbus adapter type as detected by
the drive. The value should not be adjusted by the user.
If this parameter is undefined, the communication between the
drive and the module has not been established.
2 PROTOCOL/PROFILE
Selects the application protocol and communication profile for the
network connection.
0 = Modbus/TCP protocol with ABB Drives Profile - Classic.
1 = Modbus/TCP protocol with ABB Drives Profile - Enhanced.
2 = Modbus/TCP protocol with Transparent 16-bit profile.
3 = Modbus/TCP protocol with Transparent 32-bit profile.
100 = EtherNet/IP protocol with ODVA AC/DC Drive profile.
101 = EtherNet/IP protocol with ABB Drives Profile.
102 = EtherNet/IP protocol with Transparent 16-bit profile.
103 = EtherNet/IP protocol with ODVA AC/DC Drive profile.
14 -
19
Reserved N/A N/A
20 MODBUS/TCP
TIMEOUT 0…65535 0
21 TIMEOUT MODE 0 NONE
1 ANY MESSAGE
2 CONTROL WRITE
2 CONTROL WRITE
22 WORD ORDER 0 HILO
1 LOHI
1 LOHI
23 -
26
Reserved N/A N/A