
Demontering och montering av elektronikenheten
(se bild 6 sid 13)
Vid demontering av elektronikenheten, skruvas de två skruvarna (1) ur växelvis
tills toppen skjuts ut ur manteln.
Vid montering av toppen i manteln så smörjs först O-ringen som tätar mot
manteln. Därefter vrids toppen tills dess att skruvarna äntrar hålen i manteln
och de kan skruvas in växelvis. Se till att O-ringen inte kläms.
Disassembling and assembling (see fig. 6 on page 13)
To remove the electronic unit out of the casing, unscrew the two screws (1)
alternately until the unit comes out of the casing.
To assemble the unit into the casing, lubricate the O-ring and turn the unit to
make the screws enter the threading in the casing. Tighten the screws
alternately. Be careful that the O-ring does not crush.
6
Dimensioner
6
Dimensional drawings
Hygienisk mutter DIN 11851 (anslutning 7 och C)
Screwed connection to DIN 11851 (connection 7 and C)
Anslutning R 1/2“ (anslutning 1 och 2)
G 1/2” process connection (connection 1 and 2)
24