24 - 19 pin Programmer Secondary Disconnect (Breaker)
The 19-pin programmer disconnects can now be included with the AKD-6 series retrofills to
accommodate the extended features of the
rip Unit. The 19-pin programmer-
Emax 2 T
disconnect assemblies already come pre-installed and wired from the factory and do not
require any installation in the field.
The compartment side is installed and wired in the field by a qualified electrician or
installation service company.
Figure 29 shows the 19-pin programmer-disconnect on the AKR30/50, bottom side of the
breaker, already installed. Table 9 displays the wiring diagram for the programmer-discon
nect (12-pin and 19-pin combined in one diagram, although the AKD-6 does not use the 12-
pin), features an exploded view of the 19
-
pin programmer disconnect. An installed view of
the 19-pin programmer disconnect appears in
For the compartment side, the
figs. 30 & 31.
19-pin is ordered separately and comes in a box.
Figure 29
19-Pin Programmer Disconnect on the AKR30/50 Breaker)
Wiring for 19 - Pin Programmer Disconnect
Table 9
36 ©2022 Emax 2 Retrofill Circuit Breakers 800A-4000A
2TSA451014P0000 Rev-B
output 1A output 1B
H31
Hc3
K31
K32
