ABB Ekip E-Hub, Руководство пользователя, Страница: 28 / 41

2TFP900034A1001 ECN000087106 Rev. A Ekip E-Hub | 28
Fig. 24
8
Now it will be able to see all the devices connected with the Ekip E-Hub.
For each device, you can set:
• Tag Name, if not already present
• Set it to be on one of the main feed lines(e.g. an incomer breaker)
• Set it to be on a generator line (e.g. diesel generator, PV system, turbine…)
• If it has to send data to the ABB Ability™ EDCS
• Note: at least one Main or Generator device must be set inside a plant
Once all the settings on each device have been completed. Click on Add to ABB
Ability™ EDCS.
Fig. 25
NOTE :
Make sure that TFTP is enabled now. Please refer to the
Dial
Settings
on how to enable TFTP.