ABB Ekip E-Hub, Руководство пользователя, Страница: 17 / 41

2TFP900034A1001 ECN000087106 Rev. A Ekip E-Hub | 17
Network
Settings
• Click Communication > Parameters
Fig. 10
Parameters
Parameters Description Default
Force Static IP Address
Switch on/off to use static IP address.
To make the Static setting available,
please enable the Force Static IP
Address .
Off for LAN1
On for LAN2
Static IP Address IP address on LAN port
0.0.0.0 for LAN1
10.86.92.1 for LAN2
Static Network mask Subnet mask for LAN port 255.255.255.0
Static Gateway Default gateway IP address 0.0.0.0
Optional DNS Server 1 DNS Server IP. Keep default value for LAN2 0.0.0.0
Optional DNS Server 2 DNS Server IP. Keep default value for LAN2 0.0.0.0
DHCP enable Enable/Disable DHCP server for LAN2 On
DHCP server IP range
begin
IP range begin that DHCP server dynamic
distributing
10.86.92.100
DHCP server IP range end
IP range end that DHCP server dynamic
distributing
10.86.92.255
• The custom should be careful if wants to change the LAN2 IP address. Make sure
the input static IP address and the DHCP server IP range are correct and in the
same LAN before save the configuration.
• Click Save the configuration.
NOTE : Please always remember the input LAN2 static IP address before save the
changes.