ABB Ekip E-Hub, Руководство пользователя, Страница: 26 / 41

2TFP900034A1001 ECN000087106 Rev. A Ekip E-Hub | 26
4
In order to ensure that ABB Ability EDCS will work properly, it is suggested to
follow these two steps to check whether the system and the device is
configured in the right way
- System check
- Activate configuration session
Click
Go to discovery to scan devices
Fig. 20
5
With Automatic discovery, Ekip Connect will scan the whole Modbus network
looking for devices to provision.
With Manual discovery, it is possible either to provide the list of specific Modbus
RTU or IP addresses or to narrow the scan to a particular range of addresses.
The Manual discovery is recommended: in the new Page select “manual
Discovery settings”
Fig. 21