5
3.3
Use of Controls – Fig. 3.2 to 3.6
3
DISPLAYS & CONTROLS…
Fig. 3.2 Advancing to Next Page
Fig. 3.3 Moving between Frames
Note. Continued pressure on the
and
switches causes the
rate of change of the displayed
value to increase. To make small
adjustments operate the switches
momentarily.
Fig. 3.4 Adjusting a Parameter Value
Fig. 3.5 Selecting a Parameter Choice
Used for selecting Automatic or Manual mode on alternate operations. When
Manual mode is selected the displays revert automatically to the process variable
values and control output or valve position (if position-proportioning or boundless
motorized valve control is selected at
Control Type
frame in the
Set Up Control Page
)
– See
Section 4.10 in the Programming Guide.
Fig. 3.6 Auto/Manual Switch Functions
Frame 1
Frame 2
Frame 3
Frame 4
Page 1
Frame 1
Frame 2
Frame 3
Page 2
Frame 1
Frame 2
Frame 3
Page X
Frame 4
Advance to
next Frame
Adjust
Parameter Value
Parameter X
Y
Z
Select
