AW T4 20 |
U N I V ER S A L 4 - W I R E , D UA L- I N P U T T R A N SM I T T ER | C I/AW T4 2 0 - EN R E V. B
7
Transmitter dimensions
Dimensions in mm (in)
Figure 3 Transmitter dimensions
Optional weathershield dimensions
Dimensions in mm (in)
Figure 4 Optional weathershield dimensions
Sensor modules
Sensor modules are fitted to the transmitter baseboard when
the transmitter is configured after being ordered.
Communication module
If an optional communication module is ordered, it is fitted to
the transmitter baseboard when the transmitter is configured
after being ordered.
Wall-mounting
Dimensions in mm (in)
NOTICE
If the optional weathershield
D
is used, position it between
the transmitter and wall and pass 2 screws
C
through
fixing holes (both sides) in weathershield.
Referring to Figure 5:
1
Position the left- and right-hand mounting brackets
A
into
the recesses on the rear of the transmitter as shown and
secure with the bracket securing screws. Ensure the plastic
washers remain in the positions fitted.
2
Mark fixing centers
B
and drill suitable holes in the wall.
3
Secure the transmitter to the wall using 2 screws
C
in
each mounting bracket.
Figure 5 Wall-mounting the transmitter
16
(0.63)
10
(0.39)
144 (5.67)
164 (6.46)
99 (3.89)
73 (2.87)
144
(5.67)
209 (8.22)
175 (6.89)
200
(7.87)
A
B
Left hand bracket
only shown –
right hand
bracket omitted
for clarity
62
(2.44)
152 (5.98)
Optional
weathershield
