ABB ACH580-34, Быстрая установка и руководство по запуску

Страница: 19 / 308

Use the control panel to do the start-up procedure. The two commands at the bottom
of the display (Options and Menu) show the functions of the two softkeys
and
located below the display. The commands assigned to the softkeys are different
depending on the context. Use the arrow keys , , and to move the cursor or
change values depending on the active view. The key
?
shows a context-sensitive help
page.
3. 2. 1.
In the Home view, press
(Menu) to enter the Main menu.
In the First start assistant screen,
select Not now and press
(Next). Power up the drive. Make sure
that you have the motor name-
plate data available.
Select the language you want to
use and press
(OK).
Note: After you select the lan-
guage, it takes a few minutes for
the control panel to wake up.
5. 4.
Go back to the Main menu by
pressing
(Back) repeatedly.
In the Main menu, go to Parameters > Complete list > 95 HW config-
uration by pressing
(Select) repeatedly. Select 95.01 Supply
voltage and press (Edit). Select supply voltage and press
(Save).
In the Main menu, select First
start assistant and press
(Se-
lect). In the First start assistant,
select Commission the ACH580
and press
(Next).
8. 7. 6.
Make additional adjustments
starting from the Main menu.
Press
(Menu) in the Home
view to enter the Main menu.
The Home view monitors the val-
ues of selected signals. To complete the First start assist-
ant, select the values and settings
when prompted by the assistant.
Continue until the panel shows
that the first start is complete.
Select Primary settings and press
(Select).
When the panel shows that the
first start is complete, the drive
is ready for use. Press
(Done)
to enter the Home view.
To get more information on the
Primary settings menu items,
press
?
to open the help page.
EN – Quick installation and start-up guide 19
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
SV
TR
ZH