ABB ACH-AP-H Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 82

background image

Function

Sub-menu

Adjust motor-related settings, such as control mode, nominal values, ID run or thermal
protection. Note that the settings that are visible depend on other selections, for example
vector or scalar control mode, used motor type or selected start mode.

Motor

Set up loop controller settings and actual values. Loop controller is only used in remote
control.

Loop controller

Controls one motor connected to the drive and up to 3 auxiliary motors.

Pump and fan control

Use the drive with a fieldbus.

Communication

Set up start/stop commands, reference, and related features, such as constant speeds
or run permissions.

Start, stop, reference

Set up acceleration and deceleration settings.

Ramps

Set the allowed operating range. This function is intended to protect the motor, connected
hardware and mechanics. The drive stays within these limits, no matter what reference
value it gets.

Limits

Set up the settings and actual values for the process PID controller. PID is only used in
remote control.

PID

To make the protocol configurations easier.

Fieldbus

Contains settings for advanced functions, such as triggering or resetting faults through
I/O, or switching between entire set of settings.

Advanced op-
tions/functions

Contains settings for language, date and time, display (such as brightness) and settings
for changing how information is displayed on screen.

Clock, region, display

Enables you to reset the Home view to its original factory state.

Reset to defaults

I/O

In the

I/O

menu, each row provides terminal name, number, electrical status and logical

meaning of the drive. Each row also provides a sub-menu that provides further information
on the menu item and allow you to make changes to the I/O connections.

Diagnostics

The

Diagnostics

menu provides diagnostic information, such as faults and warnings and

helps you to resolve potential problems. Use the menu to make sure that the drive setup is
functioning correctly.

Note:

The contents displayed may vary based on the drive/device to which the panel is

connected, and the menu shown is only an example.

50 Functions in the main Menu

«
...
48
49
50
51
52
...
»

Содержание ACH-AP-H



















































































Отзывы:

Нет отзывов

Похожие инструкции для ACH-AP-H

Бренд: Gardena Страницы: 17

Бренд: SAFI Страницы: 18

Бренд: Badger Meter Страницы: 2

Бренд: Badger Meter Страницы: 48

BadgerTouch HREBT

Бренд: Badger Meter Страницы: 12

Бренд: Badger Meter Страницы: 16

Бренд: Daikin Страницы: 38

Бренд: Daikin Страницы: 2

Бренд: Daikin Страницы: 148

Бренд: Daktronics Страницы: 52

Бренд: Waeco Страницы: 20

Бренд: Z-Wave Страницы: 56

Бренд: Parker Страницы: 44

Бренд: Lawler Страницы: 5

Бренд: nekos Страницы: 8

Бренд: nekos Страницы: 8

Бренд: Neles Страницы: 12

Бренд: Paradox Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды