ABB AC 800M, Конфигурация, Страница: 49 / 260

Section 3 Device Import Wizard Converting an EDS File to a Hardware Unit Type
9ARD000014-600 A 49
Converting an EDS File to a Hardware Unit Type
To use the Device Import Wizard for converting an EDS file to a hardware unit type,
follow these steps:
1. Open the Control Builder and create a new project.
2. Select
Libraries > Hardware
.
3. If a new library is to be created, then:
– Right-click
Hardware
and select
New Library
. The
New Library
window is displayed, as shown in Figure 5 .
Figure 5. New Library Window
– Enter a library name in the
Name
field and click
OK
. The new user
defined library is created under the hardware tree.
4. From the hardware tree, expand the user defined library.
5. Right-click
Hardware types
and select
Insert/Replace Hardware Type(s)
.
The
Insert Hardware Definitions
window appears as shown in Figure 6 .