Mounting/Installation
Product manual 2TMD042000D0009
│
12
7.2
General installation instructions
■
Terminate all branches of the wiring system via a connected bus device (e.g., indoor station,
outdoor station, system device).
■
Do not install the system controller directly next to the bell transformer and other power
supplies (to avoid interference).
■
Do not install the wires of the system bus together with 100-240 V wires.
■
Do not use common cables for the connecting wires of the door openers and wires of the
system bus.
■
Avoid bridges between different cable types.
■
Use only two wires for the system bus in a four-core or multi-core cable.
■
When looping, never install the incoming and outgoing bus inside the same cable.
■
Never install the internal and external bus inside the same cable.
7.3
Product dimensions
7.4
Installation height
1 3 1 .4
1 2 2 .3
1 8
1 .5 0 m (4 .9 fe e t)
