ABB A140-H55, Руководство по эксплуатации

Страница: 8 / 148

Operation Manual / 1 Introduction
1 Introduction Page 6 / 8
© Copyright 2016 ABB. All rights reserved. HZTL4005_EN Revision E July 2016
1.3 Storage of new turbochargers and spare parts
Storage of new turbochargers and spare parts for up to 6 months
New turbochargers and spare parts can be stored in their closed packages for 6 months from
the date of delivery without additional mothballing measures, indicated by VCI label on package.
Figure 2: Volatile Corrosion Inhibitor (VCI)
Only dry rooms with 40...70 % atmospheric humidity, in which no water condensation can
form, are suitable as storage locations.
Storage of new turbochargers and spare parts for more than 6 months
WARNING
Health protection when handling VCI
VCI products are not hazardous in terms of the Ordinance on Hazardous
Substances. Nevertheless, the following points must be observed when
handling VCI:

Observe the information in the material safety data sheet.

Ensure proper space ventilation.

Do not eat, drink or store food at the workplace while working with VCI.

Clean hands and face after working with VCI.

For more information, see www.branopac.com.
Wear safety gloves to protect against mechanical hazards.
Every 6 months, the following mothballing measures are required:

Open package.

Remove VCI corrosion protection emitter from package and replace with a new VCI corro-
sion protection emitter of the same kind. New VCI corrosion protection emitters can be ob-
tained from www.branopac.com.

Old VCI corrosion protection emitters must be disposed of in an environmentally compati-
ble, professional way and in compliance with locally applicable regulations.

Close package. The more tightly the package is sealed, the longer the protection duration.