![background image](http://html.mh-extra.com/html/abb/615-series-ansi/615-series-ansi_technical-manual_4665484.webp)
1MAC050144-MB C
Section 6
Supervision functions
615 series ANSI
477
Technical Manual
6.8.6
Signals
Table 408: OPTM Input signals
Table 409: OPTM Output signals
6.8.7
Settings
Table 410: OPTM Non group settings
6.8.8
Monitored data
Table 411: OPTM Monitored data
6.8.9
Technical data
Table 412: OPTM Technical data
Name
Type
Default
Description
BLOCK
BOOLEAN
0=False
Block input status
POS_ACTIVE
BOOLEAN
0=False
When active indicates the equipment is running
RESET
BOOLEAN
0=False
Resets the accumulated operation time to initial value
Name
Type
Description
ALARM
BOOLEAN
Alarm accumulated operation time exceeds Alarm value
WARNING
BOOLEAN
Warning accumulated operation time exceeds Warning value
Parameter
Values (Range)
Unit
Step
Default
Description
Operation
1=Enable
5=Disable
1=Enable
Operation Off / On
Warning value
0...299999
h
1
8000
Warning value for operation time supervision
Alarm value
0...299999
h
1
10000
Alarm value for operation time supervision
Initial value
0...299999
h
1
0
Initial value for operation time supervision
Operating time hour
0...23
h
1
0
Time of day when alarm and warning will occur
Operating time mode
1=Immediate
2=Timed Warn
3=Timed Warn Alm
1=Immediate
Operating time mode for warning and alarm
Name
Type
Values (Range)
Unit
Description
OPTM
Enum
1=enabled
2=blocked
3=test
4=test/blocked
5=disabled
Status
OPR_TIME
INT32
0...299999
h
Total operation
time in hours
Description
Value
Motor run-time measurement accuracy
1
1. Of the reading, for a stand-alone IED, without time synchronization.
±0.5%
Содержание 615 Series ANSI
