bdi
Access
JTAG interface library, BDI1000 (ARM7/9/9E)
Installation Manual
11
© Copyright 1992-2008 by ABATRON AG
V 1.02
2.4.2 Ethernet communication
The BDI1000 has a built-in 10 BASE-T Ethernet interface (see figure below). Connect an UTP (Un-
shilded Twisted Pair) cable to the BD1000. For thin Ethernet coaxial networks you can connect a
commercially available media converter (BNC --> 10 BASE-T) between your network and the
BDI1000. Contact your network administrator if you have questions about the network.
10 BASE-T
PC / Unix
Host
Target System
Ethernet (10 BASE-T)
1 - TD+
2 - TD-
3 - RD+
4 - NC
5 - NC
6 - RD-
7 - NC
8 - NC
Connector
BDI
1000
RS232
LI
POWER
10 BASE-T
1
8
When the LI LED light is ON, data link is successful between the
UTP
port of the BDI1000 and the hub to which it is connected.
ARM
