6
N.
Ladder bracket. The ladder bracket is
attached to the header and accepts the
top of the provided extension ladder.
O.
Ladder straps. A ladder strap is located
on each side of the ladder bracket to
further secure the provided extension
ladder.
P.
Pressure monitor mounting bracket. An
Abatement Technologies’ RPM series
pressure monitor can be installed inside
the unit on this mounting bracket. This
mounting bracket is included with all
units (pressure monitor sold separately).
Q.
Remote variable speed control. There
are designated electrical sockets on the
inside and the outside of the unit that are
wired to the remote variable speed
control. Plugging a PAS750 Portable Air
Scrubber into these sockets allows
those units to be controlled with the
remote variable speed knob that can be
accessed while standing on the
extension ladder.
R.
Internal GFCI receptacles. One
receptacle is designated for a PAS750
Portable Air Scrubber to allow remote
variable speed control (Q). The
remaining receptacles can be used for
other devices that run off of 110-
120VAC. A maximum of 15 amps can be
used with AG8000’s electrical system.
S.
PAS750 Portable Air Scrubber (not
included). The optional PAS750 Portable
Air Scrubber unit is recommended in
order to create negative pressure for
particulate containment.
T.
Recessed ladder pockets. There are two
recessed pockets in the floor that secure
the extension ladder’s feet to keep the
ladder from sliding and also to ensure
that the proper angle is kept.
U.
Top cover (not shown). The top cover
closes the opening in the header to
provide full containment during transport
and during usage before ceiling tiles are
removed (replacement P/N:
AG8000TOP-FR).
