5
H.
Header. The manual refers to this part
as the header, which is raised and
lowered using the provided hand crank
or a power drill with clutch (not
provided).
I.
Fabric enclosure. The fabric enclosure
provides a flexible barrier that can
accommodate the raising and lowering
of the header. This enclosure is
constrained by the telescoping
members, which keeps it from
encroaching into the work space under
negative pressure. It is removable and
washable (replacement P/N:
AG8000ENC-FR)
J.
Raising/lower mechanism. The
raising/lowering mechanism adjusts the
height of the header. This can be
operated by the provided hand crank or
a power drill with clutch (not included).
K.
External receptacles. The unit comes
with a 3-prong male receptacle for
connection to a 120V 60Hz power
source that is used to power the female
receptacles on the unit. There is also a
receptacle that is designed specifically
for use with a PAS750 Portable Air
Scrubber unit (this receptacle is
connected to the remote variable speed
control inside the cart, DO NOT use with
any other device). The other receptacle
is a standard receptacle. A maximum of
15 amps can be used with AG8000’s
electrical system.
L.
Cord wrap. Store an extension cord
around the cord wrap for convenience
(extension cord not included).
M.
Intake/exhaust port. Acts as an exhaust
port when a PAS750 Portable Air
Scrubber unit is located inside the cart.
The AG8000CADK Caddy and
Connection Kit (not included) can be
attached on the outside for locating a
PAS750 or PRED750 externally.
