ABACO MACHINES ALG50A, Руководство по эксплуатации

Страница: 11 / 24

- Make sure to check the rubber pads are free from dirt. Grease
and other substances that may reduce their effectiveness. Clean
the rubber pad surfaces by water. Then wait till dry and use the
device after.
- Do not lift wet slabs. The grip depends on friction. Lifting wet
slab may cause the rubber pads to lose their grips.
- No more than one piece should be lifted at any time.
- Position the lifter at the center of the slab to be lifted, so that the
load is balanced.
- Make sure that the slab is inserted to the full depth into the
opening of the lifter (Figure available at page 13).
7
b) General Safety Instructions:
Cautions:
- In order to protect from any accident, it is important to follow
safety rules and regulations.
- Read the operation manual carefully before using.
- Make sure that the operation manual is always available
beside the place where the lifter is used.
- Give permissions to operate the Little Giant Lifter Automatic
only to persons who are well-trained and competent to work.
- Use appropriate PPE (Personal Protective Equipment) such as
helmet, gloves, and safety boots, etc.
- Ensure and confirm each time before using the Little Giant
Lifter Automatic has No Damage mechanically and
functionally and is ready to be operated safely in the safe
working conditions.
- Repairs and checks are to be made only by qualified persons.