ABACO MACHINES ALG50A, Руководство по эксплуатации

Страница: 15 / 24

11
Step 3: Clamp the slab:
- Lowering the lifter to be perpendicular to the slab and place at
the center of the slab. (Figure 3.1)
Note: Position the lifter securely at the center of the slab so that
the load is balanced. Make sure that the slab is inserted in full
depth to the opening of the lifter (Refer the Appendix, page 13)
- Lift the stone slab slowly to ensure the weight balance. During
lifting, the locking latch system allows the Lifting pin automatic
to keep clamping plates closed to grip the stone slab tightly.
Then,
stone slab the system releases the when the stone slab
touches the ground.
Note: If the clamp do not grip the slab firmly and securely plates
when lifting, lower the lifter, recheck the status, and lift it up
again.
Figure 3.1
Equal spacing
Slab center