Solares
TM
Smart Spa Parts Manual
CD0039
32
Rev:1121
Replacement Instructions
Removing and replacing Outer Door Skin Part # 8
1.
Turn handle to open position and loosen both set screws.
2.
Use Pliers to grip the hex rod through the hole in the bottom of the door and pull it out.
3.
Remove all screws from perimeter.
4.
Lift up from bottom of skin and carefully pull out.
5.
Swap out hardware.
6.
Place back in inner skin by putting the top edge in place first and then dropping the bottom edge
down flush.
7.
Ensure all pawls are fully extended and run the rod up through the hole in the bottom of the
skin and then through all pawls and the handle (Which should be closed.)
8.
Open the handle and tighten down the set screws to secure the rod.
9.
Replace screws around the perimeter of the door skin.
Part # 1
–
Remote Compression Latch
1.
Remove outer skin per above instructions.
2.
Replace latch.
3.
Verify that flat of latch is facing front of door. If it is not then you’ll have to loosen the screw,
remove it, and then reinsert it after rotating 180°.
4.
Replace outer skin per above instructions.
Part # 2
–
Door Latch Hardware
1.
Loosen screw hidden under the latch grabber and slide the assembly out of the latches body.
2.
Slide the new hardware assembly into the latch ensuring that the flat face is oriented with the
front face of the door.
