10 User Guide for the Platinum Series Sound Processor
User Guide for the Platinum Series Sound Processor 11
Batteries & Battery Charger
A Lithium Ion rechargeable battery or a compartment that accommodates three
standard AA batteries powers your PSP .
When you are not using your processor, it should be turned off; otherwise, the bat-
tery will continue to drain .
NOTE: Remove the rechargeable battery or the AA battery compartment from
the processor when it is not likely to be used for an extended period of time.
To prevent intermittent operation of the processor, the battery contacts on the
rechargeable battery or battery compartment and on the processor should be kept
free from dirt and dust . Gently clean the contacts with a hearing aid brush or dry
cotton swab at least once a month .
If the rechargeable battery is dropped, inspect it for evidence of damage or cracking .
If any evidence of damage is seen, the battery should be replaced .
WARNING: Batteries may explode if disposed of in fire. To prevent injury or
burns, do not allow metal objects, such as keys or coins, to contact or
short circuit the battery terminals. Covers are provided for use when
carrying rechargeable batteries or the AA battery compartment.
WARNING: Power supplies and battery chargers should be operated in an open
area to ensure adequate airflow. While no injury cases have resulted,
components may become hot during normal use or a fault condition.
If the device’s temperature results in discomfort or pain when touched,
disconnect the power source and contact your local AB representatives.
Battery Replacement
To remove the rechargeable battery or AA battery compartment:
• Turn the processor off (o).
• Gently press and raise the release lever on the side of the processor.
Figure 11: Battery Release Lever .
Cable
The cable connects the headpiece to the processor and provides the pathway for
relaying information between the internal and external components of the system .
Cables are available in multiple lengths and colors .
To attach the cable to the headpiece
1.
Hold the headpiece in one hand and the cable connector in the other hand .
2.
Push the cable connector firmly into the headpiece connector .
To attach the cable to the sound processor
1.
Hold the sound processor in one hand and the cable connector in the other hand .
2.
Push the cable connector firmly into the sound processor connector .
NOTE: Be sure the processor is turned off before removing the cable from
the headpiece.