ab Platinum Series Скачать руководство пользователя страница 4

4   User Guide for the Platinum Series Sound Processor

User Guide for the Platinum Series Sound Processor   5 

Platinum Series Sound Processor

Your audiologist will demonstrate the adjustable controls of the Platinum Series 
Sound Processor (PSP) and instruct you on appropriate settings . 

Figure 1: Platinum Series Sound Processor .

Program Control 

The program control, on the left side of the control panel, is used to turn the 
processor on and off, to select one of three programs, and to test the headpiece 
microphone .  The dots on the program selector represent different programs on  
the processor programmed by your audiologist .  The single   represents program  
# 1,    represents program # 2, and 

 represents program # 3 .  Your audiologist 

will determine how many programs are appropriate and instruct you on when to 
use each program .  The   position represents the headpiece microphone tester 
function detailed in the 

“Using the Platinum Series Sound Processor” 

section of this 

manual .  The (o) position will turn the processor off .

Volume Control

The volume control, indicated by 

 and located to the right of the program 

control, allows the user to adjust the loudness level of the processor .  Turning the 
control to the left (toward the smaller end of the scale) decreases the volume .  
Turning the control to the right (toward the larger end of the scale) increases the 
volume .  The volume range (how soft to how loud the volume can be adjusted) is 
programmed for you by your audiologist .

During your programming session, the audiologist will program your processor 
so that the 12:00 position on the volume dial represents your most comfortable 
loudness level . 

Processor Protection .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .   31
Implant Protection  .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .    .   32
Electrostatic Discharge  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 32
Airport Security Metal Detector  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 33
X-Ray Machines  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 34
Recommended System Operating and Storage Temperatures  .    .    .    .    .    .    .    .    .   34

Guidance and Manufacturer’s Declaration                                                              35

Compatibility Tables                                                                                                     39

Contact Us                                                                                                                       40

Содержание Platinum Series























Отзывы: