Release Note
22-COMM-E EtherNet/IP Adapter
Firmware v1.007
This release note describes major revision 1, minor revision 7 of firmware
for 22-COMM-E EtherNet/IP adapters.
Introduction
The following information is included in this document:
Enhancements
This section describes the enhancements provided in this revision of
firmware:
•
Added support for flashing a PowerFlex 4M drive directly through the
22-COMM-E adapter or indirectly using a 22-SCM-232 serial converter
module (firmware v2.005 or higher).
•
The MOD status indicator now is solid green when the drive is being
controlled using:
–
The Control Bar feature in DriveExplorer Full or DriveExecutive.
–
Explicit messages to write to the CIP Assembly or Register objects.
–
PCCC messages to write to the N41 (Single mode) or N44
(Multi-Drive mode) files.
Corrected Anomalies
This section describes the anomalies corrected in this revision of firmware:
•
Changed the Web interface to completely display certain adapter Web
pages containing large amounts of dynamic data, including the
diagnostic item and fault/event queue Web pages.
•
The adapter will no longer erroneously detect a duplicate IP address
when it is assigned an address by a BOOTP server.
For information about:
See page:
