22-COMM-E EtherNet/IP Adapter Firmware v1.007
5
Installing the Flash Kit
1.
Install the flash kit utility from the Allen-Bradley Web Updates site for
the 22-COMM-E adapter. (This also automatically installs the latest
version of the ControlFLASH utility on your computer.)
2.
You are now ready to use DriveExplorer, DriveExecutive or
ControlFLASH to update the adapter. Follow the instructions in the
appropriate section below.
Using DriveExplorer Lite/Full
1.
With the Flash Kit installed (see
DriveExplorer and go online (via 1203-USB or 22-SCM-232 converter)
with the drive that is connected to the adapter.
2.
In the DriveExplorer treeview, click on 22-COMM-E EtherNet/IP
Module. Then click the information icon as shown in
the adapter’s properties screen.
3.
On the 22-COMM-E properties screen, click the Details tab.
Important:
This update may cause the adapter parameters to revert to
their default values. You may want to save your
configuration using DriveExplorer or the HIM CopyCat
feature before upgrading.
4.
To start the flash update, click the
Flash Update…
button. Follow the
screen prompts until the flash update procedure completes and displays
the new firmware revision (v1.007).
Using DriveExecutive
1.
With the Flash Kit installed (see
DriveExecutive and go online with the drive that is connected to the
adapter.
2.
In the DriveExecutive treeview, click on 22-COMM-E. Then click the
information icon as shown in
to display the adapter’s Properties
screen.
3.
On the 22-COMM-E Properties screen, click the Component Details tab.
Important:
This update may cause the adapter parameters to revert to
their default values. You may want to save your
configuration using DriveExecutive or the HIM CopyCat
feature before upgrading.
4.
To start the flash update, click the
Flash Update
button. Follow the
screen prompts until the flash update procedure completes and displays
the new firmware revision (v1.007).
