background image

Publication 1738-IN002B-EN-E - November 2004

ArmorPoint 24V dc Input Modules, Series A    

 11

General Specifications (continued)

Emissions

CSPR 11:

 

Group 1, Class A

Enclosure Type Rating

Meets IP65/66/67 (when marked)

Mounting Base Screw Torque

#8 screw, 7.5 in. lbs. in Aluminum, 16 in. lbs. in Steel

Weight

Imperial (Metric)

0.64 lb. (0.29 kg)

Wiring Category

2

1 - on signal ports

Certifications:

3

 

(when product is marked)

c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada

 

CE

European Union 89/336/EEC EMC Directive, compliant with:

 

EN 61000-6-4; Industrial Emissions

 

EN 50082-2; Industrial Immunity

 

EN 61326; Meas./Control/Lab., Industrial Requirements

 

EN 61000-6-2; Industrial Immunity

 

C-Tick

Australian Radiocommunications Act, compliant with: 

 

AS/NZS CISPR 11; Industrial Emissions

1. Input OFF to ON or ON to OFF delay is time from a valid input signal to recognition by the module.

2. Use this Conductor Category information for planning conductor routing. Refer to Publication 1770-4.1, "Industrial Automation Wiring

 

 

and Grounding Guidelines".

3.   See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.

Содержание 1738-IV8M8













Отзывы: