AUTO FUNCTIONS
If the conductive area of the belt (the black area on the back of the
exercise pads) does not touch the skin, the intensity can only be set up
to “1”. An alarm will sound after 2 seconds and the unit will automatically
switch off. If the belt is removed during use, the intensity is automatically
reset to “1”. If the belt is not immediately placed back into contact
with the skin, the unit will automatically turn off after 20 seconds.
The AbCommand™ iX2™ unit has an auto-timer. It will automatically
switch off after 10 minutes of use. If you change the exercise mode
during the 10 minute exercise period, the timer will continue to count-
down from the original leftover time.
OTHER FEATURES
1. Safety features
The AbCommand™ iX2™ unit has several built-in safety features:
A) AUTO OFF: After approximately 10 minutes, the AUTO OFF
function will turn off the unit if it is not in use.
B) FAILSAFE: The unit will not work if you are not wearing it, if
there is not enough Conductive Gel present or no load is
connected.
C) ALARM: In case of B) the unit will sound a beeping alarm.
D) KEYLOCK TOGGLE ON/OFF: Press and hold the “M” function
button for 3 seconds.
2. If no muscle contractions are felt, move the belt slowly around
the area that you want to target. Make sure you have enough
AbCommand™ iX2™ Conductive Gel placed on the inside of the
Conductive Pads. Gradually increase the PULSE INTENSITY by pushing
the UP button for each channel in the mode until muscle contraction is
felt.
21
EXERCISE GUIDANCE
During the first week, you should give your muscles time to adjust to their
new work-out. Use the unit for a maximum of 10 minutes per muscle
group, once or twice a day, with a minimum of 4 hours resting time in
between each exercise session.
After the first week, you can use the AbCommand™ iX2™ belt for
a maximum of 30 minutes per muscle group, 3 times a day, with a
minimum of 4 hours resting time between sessions. You should adjust
your exercise routine to your personal fitness level and you should always
ensure that you feel comfortable.
To avoid unnecessary discomfort and ensure maximum performance,
please replace the Conductive Pads after a while, or sooner if their effect
becomes weak or erratic.
MAINTENANCE
The AbCommand™ iX2™ belt is made of quality materials. The only
maintenance required with the AbCommand™ iX2™ is to clean the
Conductive Pads and belt gently from time to time, and to replace the
battery when needed. Please refer to page 23 for detailed cleaning
methods.
The Conductive Pads are a consumable item and can wear with use,
depending on the gel you are using, your own body fluids and how often
you use the belt. A discoloration of the conductive area and a “crumbled
look” after many uses, however, is normal.
NEVER BEND the Conductive
Pads! Worn Conductive Pads can reduce the performance of the unit
or cause the belt to feel erratic. Wear and tear is not covered by the
product warranty.
If several people want to share the AbCommand™ iX2™ belt you can
easily detach the computer unit by unsnapping it from the neoprene
center and use it on your own personal belt for hygienic reasons. Just
pull the unit off and put it on a new belt.
The AbCommand™ iX2™ belt is energy efficient. The batteries last for
approximately 30 sessions of ten minutes each. If the output becomes
22
Содержание iX2
Страница 1: ......
