17
3. Screw the locking knob to lock the
inner pole in place firmly.
Charging The Battery
Do not expose the battery to
extreme condition such as heat impact.
Risk of injury from escaping electrolytic
solution.After eye/skin contact rinse the
affected ares with water or a neutraliser
and consult a doctor.
Charge the battery in a dry
room only . Check that the battery’s
outer surface is clean and dry, before
attaching the charger.there is a risk of
injury due to electric shock.
Only use the charger (Model#
A112701 by AAVIX) to charge the
battery. Do not charge the battery more
than 5 hours at a time. Otherwise, the
battery and the appliance may be
damaged and longer charging times
would be a waste of energy. Excessive
charging will void the warranty.
Do not briefly charge the battery
several times in row.
1. The battery needs to be charged
before first use and whenever it fails
to produce sufficient power on jobs
that were easily done before. After
several charge and discharge cycles,
the battery will attain full capacity.
The battery may become warm while
charging; this is normal and does not
indicate a problem.
2. Remove it from the tool and insert it
into the battery charger. The battery
pack will only fit into the charge in one
way. Do not force. Be sure that
battery is fully seated in the charger.
3. Your battery can be charged in the
approx. 1hr
charger supplied. Be sure
to read all the instructions and
cautionary markings on the charger
and battery pack, before using your
charger. This product is not user
serviceable. There are no user
serviceable parts inside the charger.
Servicing at an authorised service
centre is required to avoid damage to
static sensitive internal components.
4.
Read all of the instructions in the
battery charger section of this manual
before attempting to charge the
battery pack for your tool. Always use
correct battery pack (pack supplied
with tool or replacement pack exactly
like it). Never install any other battery
pack, it will ruin your tool and may
create a hazard.
Charging Procedure
1. These chargers require no
adjustment and are designed to be as
easy as possible to operate. Simply
place your battery pack into the
receptacle of a plugged in charger and
it will automatically charge the pack.
2. Plug the charger into an appropriate
AC power outlet. The LED lights green
to tell you that the charger is ready for
use.
