14
2. Move slide buckle to adjust the
length of the shoulder strap. Adjust
the length of the shoulder strap to
obtain a comfortable working position.
A few practices swings without starting
motor should be made to determine
correct balance.
3. Put the shoulder strap over your right
shoulder. Carry the tool engine at the
right side of your body.
4. If the shoulder strap is too close to
your body, you can loose the hex screw
with hex wrench, then push the lock
ring further. When the distance is fit
for your operation, tighten the hex
screw.
The Auxiliary Handle
Place the auxiliary handle to telescopic
tube, adjust to desired position and
tighten the screw (A) by Allen key set
(B)firmly.
The Battery
Fitting The Battery Pack
1. Press the battery release button(25)
and place battery pack (10) in your
hedge trimmer. Align raised rib on
battery pack with groove inside hedge
trimmer. See image below.
2. Make sure the latches on each side of
your battery pack snap in place and
battery pack secured in hedge trimmer
before beginning operation.
Removing The Battery Pack
1. Locate latches on end of battery pack
and depress to release battery pack
from the hedge trimmer.
2. Remove battery pack from the hedge
trimmer.
STARTING AND
STOPPING
WARNING:
Always wear
safety goggles or safety glasses with
side shields that comply with ANSI
Z87.1 when operating power tools.
Failure to do so could result in objects
being thrown into your eyes, resulting
in possible serious injury.
After stopping the product, the blade
will not stop immediately. Wait until the
blade has stopped fully before carrying
out any maintenance work on the
product or before transporting the
product.
Checking Before Starting
1. Replace parts that are cracked,
